Loading
EM-JT304
Revolution Turntable & Speakers
Frequently Asked Questions
FAQs
-
Yes! The Revolution Turntable is super easy to set up. Just pop on the felt slip mat, slide the counterbalance all the way, tighten it, plug it in, and you're ready.
There is no need to adjust the tracking force or counterbalance—it is already perfectly calibrated for the pre-installed Audio-Technica stylus.
-
The Revolution Turntable has a line-out-level signal, which means it can be wired into any active speaker without an external amp.
However, you may need an external amp if you have a set of passive speakers.
The Revolution Turntable has a passive speaker out port, designed explicitly for House of Marley passive speakers in the Revolution Turntable with Speakers.
-
Yes, you can play any speed vinyl on this turntable. It has 33 1/3 RPM, 45 RPM, and 78 RPM speed settings. There is no vinyl the Revolution Turntable cannot spin!
-
Make sure the Revolution Turntable's Bluetooth® is turned on. Then, turn on your desired Bluetooth speaker or headphones and ensure they are both in pairing mode.
Press the turntable's Bluetooth button to initiate Bluetooth pairing.
Note: If not connected in 20-30 seconds, press the Bluetooth pair button again on your turntable to re-initiate the pairing.
-
Our plinth is constructed from natural bamboo veneer on MDF. Both are sustainable, and bamboo is excellent because it is highly renewable—some strains grow up to 3 feet daily.
MDF is made from recycled wood fibers and waste that would otherwise be discarded, reducing the need for new timber.
The REWIND™ fabric that covers the Revolution Turntable was made from organic cotton, reclaimed hemp, and rPET (recycled plastic bottles).
All the plastic components you see, plus the chassis, are made from recycled ABS.
Finally, the tone is made using stainless steel, an excellent material because it is highly durable and recyclable. It can be reused without losing its strength or quality, reducing the need for raw materials.
-
Yes! First, make sure the Bluetooth switch is set to "IN" and press the Bluetooth pair button.
Then go into your phone, tablet, or laptop's Bluetooth settings and look for "Revolution" in the available devices and select it to pair the devices.
Now, start playing music from your device and it will play through the speakers.
