GET TOGETHER 2 XL FAQ

• • EM-JA040

• • The size of this product is 17.7x7x7in (449x179x180mm)

• • 12.56lbs (5.7 kg)

• • Bluetooth Version 5

• • ≥30m

• • 40” woofer & 1” tweeter (x2)
  • Passive Radiator x 2

• • USB-C to C+Adapter (included)

• • 20+ hrs

• • Less than 2hrs using 65W adapter minimum

• • 20+ hrs

1. 1. Turn on your device’s Bluetooth
   2. Press and hold the Power/Volume knob for 2 seconds to power on/off
   3. A blue LED light will blink to indicate pairing mode
   4. Go to your device’s Bluetooth pairing menu and select “Get Together 2 XL”

1. 1. If you see no LED light, then the battery is fully charged
   2. If you see a Breathing red LED light, then the battery is charging
   3. If you see a blinking red LED, then the device has low battery

1. 1. Press and hold the power/volume knob for 2 seconds to power the device on/off

1. 1. Turn the Power/Volume knob to the left for volume down
   2. Turn the Power/Volume knob to the right for volume up

1. 1. Press the “Multi-Function” button (circle button) 1x to play/pause music, accept a call or end a call
   2. Press and hold the “Multi-Function” button (circle button) for 2 seconds to reject a call, activate voice assistant or make a call
   3. Press the “Skip Backward” button to play the previous track
   4. Press the “Skip Forward” button to play the next track
   5. During a call, press the “Multi-Function” button (circle button) 1x to accept another incoming call
   6. During a call, press and hold the “Multi-Function” button (circle button) for 2 seconds to reflect another incoming call
   7. If on a call with another call on hold, press and hold the “Multi-Function” button (circle button) for 2 seconds to switch back and forth between the two calls
   8. Press the “Multi-Function” button (circle button) 1x to end the active call and return to the call on hold

1. 1. Press the “EQ mode” button (large circular button on the top of the speaker to the far left) to see the currently active EQ.
   2. Press the “EQ mode” button again within 8 seconds to cycle through the EQs until you find your desired EQ setting

EQ settings:

1. 1. 1. 1. “Signature Sound” – This is indicated by a white LED light
         2. “Bass Boost” – This is indicated by a green LED light
         3. “Acoustic” – This is indicated by a violet LED light

1. 1. To use Stereo Pair Mode, you will need 2 speakers from the Get Together 2 Family
      • Please note that the original Get Together series speakers cannot pair to any Get Together 2 series speakers.
   2. Place the speakers in proximity to each other for the pairing process
   3. Power on both speakers
   4. A tone will be heard indicating the speakers are ready to pair to each other
   5. On each speaker, hold down the Skip Backward and Skip Forward buttons simultaneously for 2 seconds
   6. A voice prompt will announce “left channel” and “right channel” on each corresponding speaker
   7. Go to your device’s Bluetooth pairing menu and select “Get Together 2 XL”
   8. Your device will now be connected to both speakers

1. 1. To use Multi Pair Mode, you will need at least 3 Get Together 2 XL speakers.
      • There is no limit to the number of Get Together 2 XL speakers that can be paired together. However, be mindful that the speakers should be within 30m of the device you’re playing music from.  
   2. Please note that the original Get Together speakers cannot pair to any Get Together 2 XL speakers.  
   3. Place the speakers in proximity to each other for the pairing process  
   4. Power on all speakers  
   5. Connect 1 of the 3 speakers to your device.
   6. On each speaker, hold down the Skip Backward, Multi-Function and Skip Forward buttons simultaneously for 3 seconds  
   7. A voice prompt from each speaker will announce “party mode.”  
   8. Your device will now be connected to all 3 speakers  

• • Turn on the Get Together 2 XL and activate pairing mode by following the steps below:
    • Press and hold the Power/Volume knob for 2 seconds to turn it on
    • Check to see if the speaker is showing a flashing blue LED
      • If not, double click the Power/Volume knob to activate pairing mode
  • Turn on the Stir It Up Wireless turntable and activate pairing mode by following the steps below:
    • Plug the power cord into the socket on the back of the turntable
    • Switch the knob on the back of the turntable to “On”
    • Check to see if the turntable is showing a flashing blue LED on the Bluetooth button
      • If not, double click the Bluetooth button on the turntable to activate pairing mode
  • The devices should pair together automatically and the flashing blue LED on each device will change to solid
    • If the devices do not pair together, place the Get Together XL in front of the turntable about 3-12 inches away from the Bluetooth button
  • Place a record on the turntable
  • Shift the RPM knob on the turntable to 33 or 45 (depending on the record you’re playing)
  • Shift the cue lever towards you to start the record
  • Place the cue lever above the record and shift the dial away from you to lower the stylus
  • Enjoy the music!

• • The box includes 1 Get Together 2 XL, a charging block 2 sets of adapters, 1 braided USB-C to C+ charging cable, a quick start guide, a warranty booklet, a welcome card, and a House of Marley sticker.

• • The Marley app cannot be used with the Get Together 2 XL, as it is only compatible with the Redemption ANC 2 at this time.